Was macht der Abgasdrucksensor?
Im Abgasdrucksensor wandelt eine Blechmembran den Abgasdruck in einen Weg um. Dieser Weg wird von 4 druckempfindlichen Widerständen in ein Spannungssignal umgesetzt. Der Messbereich des Abgasdrucksensors liegt bei 100 bis 500 kPa absolut, was einer Spannung von 1,0 bis 4,5 Volt entspricht.
Was passiert wenn man den Dieselpartikelfilter nicht wechselt?
Wenn der Dieselpartikelfilter verstopft ist, kann schnell ein Motorschaden die Folge sein. Sobald die Motorkontrollleuchte blinkt, ist es meistens schon zu spät. In so einem Fall muss das Auto schnell in eine Werkstatt gebracht werden, um nicht plötzlich mitten auf der Straße mit Motorproblemen kämpfen zu müssen.
Was misst der Differenzdrucksensor?
Der Differenzdrucksensor ermittelt den Druckabfall zwischen zwei Punkten im Strömungsverlauf und findet seine Verwendung an zwei unterschiedlichen Stellen im Abgastrakt . Einmal meldet er den Beladungszustand des Partikelfilters und überwacht seine Funktionsweise.
Was macht ein Differenzdruckgeber?
Der Differenzdrucksensor überwacht mit seinem piezoresistiven Sensorelement die Druckdifferenz des Partikelfilters und gibt dadurch Informationen über dessen Beladungszustand. Ein weiterer Differenzdrucksensor, der zur Regelung der rückgeführten Abgasmasse dient, befindet sich in der Niederdruck-Abgasrückführung.
What is a dpfe sensor and how does it work?
– Learn more about the functioning of the DPFE sensor What is a DPFE Sensor? DPFE means “Delta Pressure Feedback of EGR”, Delta means “difference” or “change”, so the DPFE Sensor reads changes in the pressure of the EGR system. What is a DPFE Sensor?
What are the symptoms of a Ford Focus dpfe sensor failure?
DPFE sensor failure is a fairly common problem on the Focus, and as more and more older foci get more and more miles, the failures are becoming a lot more common. The symptoms are a stumble and what feels like an erratic loss of power when cruising around at partial throttle.
How do you hook up a dpfe sensor to an EGR sensor?
Remove both hoses from the DPFE sensor then re-attach the hose that used to go to the EGR Valve, to the „Ref“ hose port on the DPFE Sensor. Doing this sort of tricks the system so that instead of opening the EGR valve when the PCM sends the signal, it will now apply vacuum to the „Reference“ sensor for the DPFE.
Where is the dpfe sensor located on a Chevy Silverado?
1. Open the hood of the vehicle. Locate the DPFE sensor, which is near the EGR valve, behind the upper intake manifold, between the firewall and engine. The sensor is a small square with two vacuum hoses on the bottom and a wire harness coming out from the side. The location will vary slightly from make and model.